Step 1: Materials and tools
You will need 4 gate hinges and 2 hinged clasps with flat head machine screws and hex nuts plus at least 8 or more 1" to 1-1/2" long, thin wood screws and possibly a 36" length of angle iron or aluminum angle (cut to 8" lengths to yield four pieces) if you have thinner polycarbonate, a power drill and hole saw, and a hand saw or power saw such as a jig saw.
Step 2: Cut the stem pass through
Step 3: Add first set of hinges
Step 4: Trim the inset sides
Step 5: Fasten sides
Drill pilot holes through edge of the left and right sheets into side sheets between them to accept the wood screws. Use 2 or more screws per joined edge. A piece of angle iron or aluminum can be used to beef up the corners if the polycarbonate you have is too thin. (If the poly is too thin, however, it may bulge.)