Let me add at this point I know this not the best way to solder and this method has its limitations. It is however the best way to fix surveillance equipment at 3 a.m., in the back of a van, in the dark. I can testify to that. Good times. I was a tech for an undercover narcotics unit for five years and this method came through for me many times.
Step 1: Building the Dispenser
1 ink pen (metal tiped is the best)
2 feet of thin solder
First take the pen apart and cut it down so it fits in the tin. Next wrap the solder around the ink cartridge that you just removed from the pen. Pull the solder off the pen and insert it into the portion of the pen that you have retained. Cap off the end with the pen cap or whatever you have. I got a ton of these little platic caps (shown in the picture) someplace that are my favorite. I like the metal tips the best because they don't melt if you use this with a regular iron. The result is a compact solder dispenser! I'm always amazed just how much solder you can fit in one of these suckers.
Step 2: Helping Hand
Step 3: Rounding Out The Kit
1 nail clippers (great foldable small gauge wire cutter)
various lengths and diameters of heatshrink tubing
The nail clippers are the cheapest and most compact flush wire cutters that you can buy. After 9/11 I was in a surveillance engeniering class and they took all my tools for the course at the gate at the airport. A nice aiport cop held them for me but, I was still without tools for the course. A quick trip to wally world yielded a cheap multi tool and nail clippers for $6. I've been a fan ever since.