Print PDF
Favorite
Email
Step 4Drill out holes for the LEDs to go into
Now we need to put some holes in the new buttons that the LEDs can go into.
Check the height of the LED and you'll know how deep you need to drill. To make sure we didn't go too far we applied some tape to the drill bit. Just drill till you hit the tape and you're golden.
Check the height of the LED and you'll know how deep you need to drill. To make sure we didn't go too far we applied some tape to the drill bit. Just drill till you hit the tape and you're golden.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
