With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share what you made with text, photos, video, and files
gather your favorite instructables together
Guitar Hero rocks, but it really needs some lights to liven up the virtual shredding. What to do? Cram in some LEDs!
Getting the two pieces off the back of the guitar is just a matter of taking off the 16 screws. There's one piece for the neck and one for the body. T...
Undo the two little screws that hold the small board that has the real buttons on it. You should now be able to easily remove the five colored fret bu...
We needed some translucent and tinted buttons that were the same size and shape as the original buttons. I was going to build the buttons with layers ...
Now we need to put some holes in the new buttons that the LEDs can go into. Check the height of the LED and you'll know how deep you need to drill. T...
Insert the LEDs of your choice. We used 5mm white LEDs. A dab of glue and the LEDs stay put.
The legs became the contact points and as such we needed to bend them into a very rough circular shape that would then be making contact for the circ...
On the circuit board we put on some copper tape that would become the contact pads for the LEDs. We put down two here, but in the end only used one fo...
All of these LEDs are to be run in parallel. These are run off of a simple coin battery of the type that come in the keychain LED flashlights, but for...
After testing out the original wiring plan we ran into the problem of there being too many points of failure. We were requiring that both legs of the ...
Put all the pieces back in their places, screw in the neck piece, and play. You'll want to hold off on putting the back of the body back on since odds...
We have a be nice comment policy. Please be positive and constructive.
Guitar Hero Guitar with Built-in Speakerby jaycruz
How to Disassemble a Guitar Hero SG Controller for Paintingby MarkWarwick
Guitar Hero Hacks: Key Moldingby bofthem
PVC Guitar Stand for Guitar Hero and Rock Bandby btravis72
Guitar Hero 3 Cameleon Coverby malcomp
Guitar Hero Keyboard!by vishalapr
Awesome Wooden Guitar Projectby duck-lemon
Make a Guitar Hero Kit for your PCby carpespasm
CUSTOM GUITAR HERO GUITAR..MADE OUT OF A STICK :)by superdude4635
Guitar Hero World Tour Drum Mod for Rock Band 2by TeamSkenes
Download our new apps for iOS, Android and Windows 8!
© 2014 Autodesk, Inc.
By clicking "Create Account" you are indicating that you have read and agree to the Terms of service.
Already a member? Login »
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »