Instructables

Guitar Project

Featured

Step 3: Squaring up the pieces

Picture of Squaring up the pieces
IMG_0053.jpg
IMG_0054.jpg
IMG_0055.jpg
The table saw did a pretty good job of cutting the wood into workable pieces, but since the rough pieces weren't very square going into the table saw they didn't come out perfectly square.  So, I took all the pieces to my uncles house and squared them up on his joiner.  When the pieces were finished It looked like I bought them from a wood store!

I test fitted them up to see how they would go together.
 
Remove these adsRemove these ads by Signing Up