Print PDF
Favorite
Email
Step 15The Cabinet, Construction
Most of the plywood for the cabinet was "reclaimed" lumber, scavenged locally. I've collected pieces for a while, mostly to use as boat building stations (forms.) I've got a nice selection in varying thicknesses.
The body of cabinet is 1/2 in. plywood, the front is 3/8 in.
All the edges were beveled by hand, so the vinyl covering would conform easier.
The body of cabinet is 1/2 in. plywood, the front is 3/8 in.
All the edges were beveled by hand, so the vinyl covering would conform easier.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
