Instructables
loading
loading
Picture of Gen 2. HAWC Bow
P7090075.JPG

_______________________________Please Note____________________________________
These instructions are for more experienced builders. In particular the complexity of the stock made it very difficult to get clear step by step pictures.There will only be three steps here as the gun cannot be broken down into very many parts. Good Luck.
__________________________________________________________________

This newly remodeled i Bow. Modifications to the original include but are not limited to: Sight upgrade, adjustable cheek riser, new stock and performance improvements.

From experience this gun performs about 10% better than the original.

Wall of text explaining the hybrid system used in the gun below, don't read it if you don't like reading.

The (i/L) Bow uses a one of a kind system that combines a Pin system with a ratchet slingshot. This allows it to retain the use of a turret and simple ammo whilst giving the gun more power as the bands do not put pressure on the pin. Furthermore the gun can handle a ridiculous amount of bands as the pin is not kept user strain and the user is not required to pull the whole number of bands back at once as is needed on a pin gun, instead the user can elect to pull back first one half of the bands and then the other making loading easier. However the drawback of this is that it takes far longer to (re)load. Personally I would not recomend this for a knex war as the reload time and weight of this gun make the user vunerable to users of weapons such as TR's or oodammo pistols. However if only slingshot weapons are being used this gun shines as very few repeating slingshots are viable for wars due to general fidlyness and long reload times when ammo is reinserted.

 
Remove these adsRemove these ads by Signing Up

Step 1: Front End

Picture of Front End
P7090002.JPG
P7090003.JPG
P7090004.JPG
P7090005.JPG
P7090006.JPG
P7090007.JPG
P7090008.JPG
P7090009.JPG
P7090010.JPG
P7090011.JPG
P7090012.JPG
P7090013.JPG
P7090014.JPG
P7090016.JPG
P7090017.JPG
P7090018.JPG
P7090019.JPG
P7090021.JPG
P7090023.JPG
P7090024.JPG
P7090025.JPG
P7090027.JPG
P7090028.JPG
P7090029.JPG
P7090030.JPG
P7090031.JPG
P7090032.JPG
P7090033.JPG
P7090034.JPG
P7090035.JPG
P7090036.JPG
P7090037.JPG
P7090038.JPG
P7090039.JPG
P7090040.JPG
includes turret, barrel, grip, sights and bow limbs.

this is the easier half of the gun as it is simpler.

 All the parts are shown then the assembly.

Step 2: Rear end

Picture of Rear end
P7090042.JPG
P7090043.JPG
P7090044.JPG
P7090045.JPG
P7090046.JPG
P7090047.JPG
P7090048.JPG
P7090049.JPG
P7090050.JPG
P7090051.JPG
P7090052.JPG
P7090053.JPG
P7090054.JPG
P7090055.JPG
P7090056.JPG
P7090057.JPG
P7090058.JPG
P7090059.JPG
P7090060.JPG
P7090061.JPG
P7090062.JPG
P7090063.JPG
P7090064.JPG
P7090065.JPG
P7090066.JPG
P7090067.JPG
P7090068.JPG
P7090069.JPG
More Difficult than the previous step. take careful note of the parts, this part is symetrical and should still be buildable
SYMEN2 years ago
Okay I figured out what the problem was. I forgot to add a pin guide in the middle section, it works now. It's destroying more crap with #64's on than it does with latex surgical tubing attached.Might be because #64's have more tensile strength if they're applied in numbers. Surgical tubing and regular bands are basically about the same though. Here are a few pictures of mine. The pictures are not exactly up to date but it shows you what I've been working on for the past week and gets the point across.
SYMEN SYMEN2 years ago
Sorry, the images didn't show up, here:
Img_2911.jpgImg_2914.jpgImg_2913.jpgImg_2912.jpg
SYMEN2 years ago
Okay, I built a hybrid similar to this one(more like my own actually), and I already have a problem. on the firing system I am using a very strong 7'' diameter rubber band for the ram, when I stretch the band back to hook it on the ratchet, slide the pin back, and quickly adapt a front end and load it to fire I'm getting like 5-10 foot shots when I am supposed to be getting 300-400 feet with the band I am using. Any ideas? Some help from somebody would be very much appreciated.
Fred the Penguin (author)  SYMEN2 years ago
Make sure there is as little pin friction as possible, as well as making sure the pin doesn't flick up. lots of power will be lost that way.

Also you generally want to wahack as many bands as possible on it, a standard load for the gun above was roughly 7 #64's. A final point is that you want the pin hitting the bullet right at the end of its path.
Noted. Thanks for the support. I am using surgical tubing so I dont have to load a bunch of bands on it. Plus surgical tubing has incredible power behind it and its minimum breaking strength is 3,500 psi. But I guess I could still have an idea from you on how to decrease pin friction because my version of your gun is using a connector barrel instead of a tube/stick barrel. So decreasing pin friction in a connector barrel might be more difficult. I got it to fire perfectly at one point, scary as crap too. It put a hole in a steel door to my house with a finned black rod.
mulletman63 years ago
Made this when you first posted it and couldn't get it to work properly. Re-made it today and its works fine - awesome gun :)
very hard to follow but im 1/2 way done
oh ya im also building this gun all in metalics
just starting to build this i already had two bakenbitz turrets built so i was disapointed at the begining
Vynash3 years ago
So amazing, 5 stars and a favorite and will build soon!
Fred the Penguin (author)  Vynash3 years ago
thanks send in a pic.
Will do when I get to building it.
WOW. I go for a few days on holiday, and what a treat to come back to! One of my favourite guns! That has to be the best stock I have seen.
Fred the Penguin (author)  TheFoofinator3 years ago
thanks, the general response to this gun was good si I decided to post it, its my first full post since the original Bizon. And I used to suck at stocks to so thats a great compliment

old stock from FSSR = yuck.
DSC02465.JPG
Bleurgh! Ugly. Will build with 8 round turret asap. I dont have enough greys to make an 18.
Fred the Penguin (author)  TheFoofinator3 years ago
you'll have to mod it a bit first tbh. but the oricinal I bow had an 8 shot turret on it so it will work.

just looked at the pics below for my progress.
P1000306.JPG
Kaiven3 years ago
I subscribe to you because you make awesome stuff. It's people like you who want to make me whip out the 4 year old K'nex collection, heh. If I ever get the time/motivation, we'll see ;)
this is awesome! 5*
mulletman63 years ago
Making it now. Is the turret just held on by the elastic band?
Fred the Penguin (author)  mulletman63 years ago
tan clip at the front.
Hmm, i copied how you had done it and my black rod was too short - then again, i already have the turret built from when i had a TR18, so the middle wheels would be different. I had to swap around a white connector and the blue connector on where the black road goes through and cut off the end of the red rod, so now it fits :)
Fred the Penguin (author)  mulletman63 years ago
ok, my turret is slightly different from the tr one anyway.
nice hey do you think i should post my pool table http://www.instructables.com/id/independence-day-knex-pool-table/
Fred the Penguin (author)  knexinventer3 years ago
thanks but I don't appreciate the spam
ok sorry
(removed by author or community request)
brilliant
I might get around to building the 5* gun =D
~KGB~3 years ago
ill have to get around to making this sometime! =D 5*
The Nomlack3 years ago
Swag!