A laser show for parties or for just home entertainement easy to do and very small.This is a ~must do~.
Step 2: What You Need
1. Glue Gun
2. Screwdriver - Torx
3. A mirror
4. Scotch or Ductape
5. An old HDD
7. One little motor
Step 3: First Things First
Take out the screws and cut the case
Step 4: Mount the Motor
Put motor on the motor ( isn`t ironic?). Fin a way to put on there. For me it was easy i used the old HDD motor and a ring from the discs that was there.
Step 5: Glue the Mirrors in Place
You need to put on a angle the mirror from the motor DON`T PUT at 90 degree. The other mirror put where ever you want
Step 6: The Wires
You need to put some wires to be easy on future. You need to put on a angle the mirror from the motor DON`T PUT at 90 degree.
Step 7: Put the Laser Correctly in Place
Make the laser to go throw the to mirrors and project on to the wall