Print PDF
Favorite
Email
Step 3Mounting the antenna
I took down the Dish and rip all the wires and receivers that I wont use anymore.
The mounting was quite easy, I measure the middle of the dish to make a hole for the mounting. The dish is made out of plastic or fiver glass so is easy to drill a hole in it.
After that I placed the wire screen on top of the dish and I centered. The antenna came later, to attach the antenna, basically the piece of 2"x2", I use a electrical pipe hanger, as shown in the pictures, and bolted to the dish it kept the screen and the antenna in place neatly.
After that it was just to put the Dish back in place, hooked up the cable and it's done.
The mounting was quite easy, I measure the middle of the dish to make a hole for the mounting. The dish is made out of plastic or fiver glass so is easy to drill a hole in it.
After that I placed the wire screen on top of the dish and I centered. The antenna came later, to attach the antenna, basically the piece of 2"x2", I use a electrical pipe hanger, as shown in the pictures, and bolted to the dish it kept the screen and the antenna in place neatly.
After that it was just to put the Dish back in place, hooked up the cable and it's done.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
