HI-CAPA (NEVER JAM AGAIN-FOREVER!)

THIS IS A EASY MOD FOR AIRSOFT GBB HI-CAPA'S.....

-IF YOU'VE BEEN HAVING ISSUES WITH THE SLIDE GETTING STUCK THIS WILL SOLVE YOUR PROBLEM.

Remove these ads by Signing Up

Step 1: THE OUTTER BARREL

If you've come across the problem of having your slide getting caught on the outer barrel -Your not alone.....

- Your gonna need to start with drilling the bottom side of the outer barrel. There is not really a lot of room for error so make sure that you mark the area where you need to drill and do it carefully. You only have about a quarter of an inch to work with.

If you have a WE version there is a little mold type circle that you can see in the picture. I marked my drilling point on the bottom lip of that circle. (see Pic)

Also use as small a screw that you can work with thats not cheap! -Because you don't want it breaking.