Print PDF
Favorite
Email
Step 3Transfering your design to wood
Cut out your design, and place it over a sheet of carbon paper. Tape the paper to the wood and trace the outline.
We had to cut out four separate pieces of wood to make our design, which meant that we had to trace our design on to all four pieces of wood.
Idea: If you do not have any carbon paper, you can rub soft pencil graphite on the back of the design or another sheet of paper. You can use this in place of the carbon paper, but the transfer is not af strong.
We had to cut out four separate pieces of wood to make our design, which meant that we had to trace our design on to all four pieces of wood.
Idea: If you do not have any carbon paper, you can rub soft pencil graphite on the back of the design or another sheet of paper. You can use this in place of the carbon paper, but the transfer is not af strong.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
