HMMWV (Humvee) Pinewood Derby Car

Step 4 Get cutting

Now it is time to cut out your piece(s). It is pretty straight forward. Remember to cut on the outside of the lines. It is easier to shave or sand a piece down than it is to build it back up. This is also a good time to even up the two sides if your are building a fender-ed vehicle.

Please note that the blade is stationary in the picture. It was posed. I aided my son in the cutting process. Father and son project, right!?! The ESS ballistic goggles were used, however. Although ballistic eye wear is not necessary, some form of eye protection is.