Print PDF
Favorite
Email
Step 9The Adaptor (Spigot x Slip-Joint)
Basically-
- The modified Holga lens will be attached to the top of the screw-on nut (#2).
- Then it will be screwed on to the spigot (#1) for focusing.
- The m-mount body cap will be attached to the bottom of the slip joint (#4).
- Trash #3.
- The modified Holga lens will be attached to the top of the screw-on nut (#2).
- Then it will be screwed on to the spigot (#1) for focusing.
- The m-mount body cap will be attached to the bottom of the slip joint (#4).
- Trash #3.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
