Introduction: HOW TO CLEAN THE LENS IN a LASER CUTTING MACHINE

Picture of HOW TO CLEAN THE LENS IN a LASER CUTTING MACHINE

HOW TO CLEAN THE LENS IN A LASER CUTTING MACHINE

Step 1: Go to the DC Room and Get the Solution and Q-tips

Picture of Go to the DC Room and Get the Solution and Q-tips

Step 2: Open the Laser Machine

Picture of Open the Laser Machine

Step 3: Turn Off the Machine and Position the Arm

Picture of Turn Off the Machine and Position the Arm

Step 4: Spray Cleaning Solution on Q-tips

Picture of Spray Cleaning Solution on Q-tips

Step 5: Clean the Top Mirror First

Picture of Clean the Top Mirror First

Step 6: Clean the Top Part of the Lens

Picture of Clean the Top Part of the Lens

Step 7: Clean the Bottom Part of the Lens

Picture of Clean the Bottom Part of the Lens

Step 8: Finally Clean the Mirror in the Machine

Picture of Finally Clean the Mirror in the Machine

Step 9: Close the Machine and the Job Is Done

Picture of Close the Machine and the Job Is Done

 :)


Step 10: How to Clean: First Swipe Mirror and Lens in Only One Direction

Picture of How to Clean: First Swipe Mirror and Lens in Only One Direction


Step 11: Then Dry in Only One Direction

Picture of Then Dry in Only One Direction

with the other side of the same Q-tips

Comments

About This Instructable

8,534views

11favorites

License:

Bio: English is not my first language. I use Google Translator and patience of friends to write Instructables. Feel free to point out style, syntax or ... More »
More by GregoriNiculitcheff:Double to Simple to Double againHow to adjust gatesupport? needed?
Add instructable to: