Introduction: HOW TO MAKE a PAPER AIRPLANE

Picture of HOW TO MAKE a PAPER AIRPLANE

18 Easy, Simple steps to make a paper airplane. 

Step 1:

Picture of

Choose the top right corner and fold the paper into a diagonal, making the paper into a triangle with some room at the bottom

Step 2:

Picture of

Make the diagonal crease, then unfold it.

Step 3:

Choose the top left corner and fold it then unfold it. (Repeat like step 1 just using the top left corner)

Step 4:

Picture of

Flip the paper over. The should be a visible big crease X on the paper.

Step 5:

Picture of

Now fold the paper over so that the top lines up precisely with the bottom of the big crease X.

Step 6:

Flip the paper over

Step 7:

Now press the middle of the crease X until the side of the paper “jump” up.

Step 8:

Picture of

Pull the top of the paper forward. the side should be folding inwards.
*It should end up like a house.

Step 9:

Picture of

Bring the bottom right corner of the triangle over to the bottom left corner and crease it.

Step 10:

Picture of

Now fold in the new bottom right corner so that there is a crease running from the top of the triangle to the lower right triangle.

Step 11:

Picture of

Flip over. Lift only the top flap of the paper and fold it over to the left side so it lines up with the bottom edges of the paper.

Step 12:

Picture of

Now fold in the left corner of the triangle, just like in step 10. make sure it lies right on top of the first one you made.
*Once finish flip it so that the smaller triangle is visible on top.

Step 13:

Picture of

Fold the top of the triangle down leaving 1 inch from the bottom.

Step 14:

Picture of

Now fold that piece up so that the point is touching the top. Flip over once finish.

Step 15:

Picture of

Fold the plane over in half making sure  the edges line up perfectly.

Step 16:

Picture of

Fold the wing at an angle where the nose (front) of the plane is about 2 times smaller than the butt (back) of the plane.

Step 17:

Picture of

Flip it over.  And fold the second wing in so the edges line up exactly with the first wing. (Matching the wings)

Step 18:

Picture of

Unfold and Fly. 

Comments

About This Instructable

900views

2favorites

License:

More by megacow914:A SolidWorks Door PlateA PVC letter WHOW TO MAKE A PAPER AIRPLANE
Add instructable to: