Introduction: HOW TO MAKE BRIGHTEST LED

Picture of HOW TO MAKE BRIGHTEST LED

THIS INSTRUCTABLE IN ON THE PUBLIC REQUEST ON HOW TO MAKE THE BRIGHTEST LED

Step 1: MATERIALS REQUIRED

Picture of MATERIALS REQUIRED

SOLDERING IRON
10*1WATT LEDS
A PROJET BOX OR ANY BOX
PHONE BATTERY
DC INPUT JACK
SWITCH
WIRES
GLUE

Step 2: START WITH THE LED

Picture of START WITH THE LED

JOIN ALL TEN LEDS IN PARALLEL
WITH THE HELP OF SOLDERING IRON

Step 3: SOLDER AND MAKE a 10 LED CHAIN

Picture of SOLDER AND MAKE a 10 LED CHAIN

ATTACH IT AT THE TOP OF THE PROJECT BOARD WITH THE HELP OF HOT GLUE GUN

Step 4: MAKE SOME HOLES

Picture of MAKE SOME HOLES

AND ADD ALL THE THINGS REQUIRED PUT THE LEDS ON THE TO THE CHARGING SOCKET AND THE SWITCH TOGETHER ON THE LEFT AND GLUE THEM ALL
ALSO ALONG WITH IT ATTACH THE BATTERY

Step 5: THE CIRCUIT DIAGRAM

Picture of THE CIRCUIT DIAGRAM

SOLDER EVERY COMPONENT

Step 6: WE GET THE BRIGHTEST LED READY

Picture of WE GET THE BRIGHTEST LED READY

THIS HAS A VERY WELL RUNNING TIME OF 5 HOURS CONTINOUSLY AND A CHARGING TIME WITH 5 VOLT OF 1 HOUR

Step 7: TESTING TIME

Picture of TESTING TIME

THIS IS REALLY POWERFUL
USE IT ANYWHERE ANYTIME
THIS IS VERY USEFUL SOURCE OF LIGHT FOR ME WHENEVER THE ELECTRICITY GOES OR
IN THE TIME OF SOME APOCALYPSE YOU MAY USE IT THAT IS COMING VERY SOON
HOPE YOU DONT FACE
ANY PROBLEMS WHILE MAKING IT AND
FEEL FREE TO ASK ANYTHING

Comments

bhvm (author)2017-08-10

It looks like a very hazardous project with no proper design and safety thought.

Are you actually charging that Litihium battery directly with 1A and 5V?!

MosfetN (author)2015-02-22

Don't you need a heat sink and current regulator?--Power LED,s become very hot when they are turned on on full power(~300mA per LED) :)

parvgupta001 (author)MosfetN2015-02-22

These LEDS dont get so hot that they damage themselves and if u want a sink then you may use some coins or penny under the leds soldered or pasted by glue gun

ReapHavok (author)2015-02-21

no resisters necessary?

parvgupta001 (author)ReapHavok2015-02-22

yes practically no resistors required

About This Instructable

1,764views

34favorites

License:

Bio: If you can't make it simple,you don't have right to make it...
More by parvgupta001:PARTY LIGHT UP BELTDiy Solar ToyDiy Air Purifier
Add instructable to: