Hack a Toilet for free water.

Step 7Installation

$C:\Documents and Settings\Owner\Desktop\instructable\021.JPG$
$C:\Documents and Settings\Owner\Desktop\instructable\022.JPG$
$C:\Documents and Settings\Owner\Desktop\instructable\023.JPG$
$C:\Documents and Settings\Owner\Desktop\instructable\024.JPG$
$C:\Documents and Settings\Owner\Desktop\instructable\025.jpg$

Back inside the toilet tank locate the rubber tube that was inside the over flow tube and follow it back to the float valve, and pull it off. Now attach the 4 foot vinyl tubing. Push the other end of the vinyl tube through the bottom of the wood lid half inch hole and up though the copper tube until just before it sticks out the other end of the copper tube.
Now lower the new lid onto the tank making sure the vinyl tubing does not interfere with the internal mechanisms in the tank. Take the metal bowl with the funnel attached and make sure the glue is dry. Now look down the 3 inch hole in the lid and you should see the over flow tube. Take the bowl and funnel and lower it onto the hole, the funnel needs to go into the over flow tube.

« Previous Step

Download PDFView All Steps

Next Step »