Hacked Calculator Prank by Kipkay
Featured

Step 4: Make Your Connections

calculatorprank_008.bmp
Run two small wires from each side of the contact on the calculator key you decide to use. Then run those two wires to the playback contacts on the module. Run the two power wires from the module to the positive and negative ends of the calculator battery terminal. When the calculator key is pressed, it will complete the circuit for that key and also the playback button.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!