Hacking the Xbox CONTROLLER

Step 32: Assembly

1. Slide the communicator socket back on.

2. Place the controller back into the top plastic.

3. Put the vibration motors back in place and plug them back in.

4. and 5. Affix the switch to the chip as discussed in the previous step.

Remove these ads by Signing Up

halo2gamer says: May 16, 2007. 6:59 PM

Is this the last step for the extra button?

About This Instructable

40,187 views

28 favorites

Posted:
Feb 17, 2007

License:

klee27x

Follow95

More by klee27x

Tags:project pic xbox hack modded Hacking mod microcontroller chip controller

Total Views	40,187
Views Today	74
Comments	68
Favorites	28

Featured Groups

Hacking the Xbox CONTROLLER

Step 32: Assembly

About This Instructable

Related

About Us

Find Us

Resources

Mobile

3 Simple Ways to Share What You Make

Create on the go:

Featured Groups

Hacking the Xbox CONTROLLER

Intro: Hacking the Xbox CONTROLLER

Step 1: Tools

Step 2: Locate and remove the screws

Step 3: Voiding the warranty

Step 4: Remove the bottom half

Step 5: Remove the board

Step 6: Back to the PCB

Step 7: Motors

Step 8: Communicator socket

Step 9: Where to put the chip

Step 10: Closer look

Step 11: FYI

Step 12: Dead bug

Step 13: Give it some juice

Step 14: Prep your wire

Step 15: Solder

Step 16: Wire wrap

Step 17: Next step

Step 18: R trigger

Step 19: Route the wire

Step 20: Next

Step 21: Affix trigger

Step 22: The "back" button

Step 23: next

Step 24: Affix back button wire to pin 6

Step 25: X button

Step 26: The hard part

Step 27: Now add a lil heat

Step 28: Affix X to pin 3

Step 29: Y signal

Step 30: Adding an external button

Step 31: Connect switch leads to pins 7 and 8.

Step 32: Assembly

Step 33: So what good does this do me?

Step 34: Some useful links

Step 32: Assembly

About This Instructable

Related

About Us

Find Us

Resources

Mobile

Get More Out of Instructables

Already have an Account?