Introduction: Hairspray Powered Nerf Gun!

In this video I'm going to show you how to make a hairspray Nerf gun. 

What you need-

Pvc Pipe-

x1 Anti vac bottle trap with 40mm fittings
x3  pvc pipe screw ends 38mm
x1 Pvc pipe straight coupling 40mm


x1 Barbecue igniter or igniter from a click lighter.
x1 screw
x1 wire

Inner barrel-
x1 5 inch long plastic or copper tube 20mm
x1 Hose fitting (Remove the valve)

Drill, All surface adhesive, PVC pipe cement 

Have fun and play safe!


ChickenJo (author)2014-09-03

It would be cool to make it flintlock

MrE (author)2014-04-27

Hairspray is a weak glue. Use silicon spray you get more oomph for your spray and you can clean out your chamber with a paper towel. The hairspray will dry out and clog up things after a while.

About This Instructable




Bio: I make science and how to videos on the interwebs. youtube-
Add instructable to: