Hakima Roof Rack - Poor Man's Strut Channel Cross Bars

Picture of Hakima Roof Rack - Poor Man's Strut Channel Cross Bars
My SUV came with a basic luggage rack.  What I really needed was something with the functionality of a Yakima or Thule cross bar but with a dumpster diver price tag. For less than the cost of a single store-bought cross bar I was able to bodge a reasonably functional bar using strut channel that I purchased from Home Depot. 

Clamping a bar to an existing roof rack ain't exactly rocket science.  It's the strut channel that does all the heavy lifting in this Instructable, I'm just here to type up the notes.  If you are already familiar with strut materials skip ahead to the Step 1.

If you're not sure what strut is just look up in a grocery store and you'll see it.  Strut is that stuff suspended from a ceiling by rods to support electrical conduit, refrigeration lines, plumbing, etc. in commercial buildings.  Think of an Erector Set in real world scale. While it ain't pretty, strut channel has a lot going for it.  (How I love thee, let me count the ways.)
    Inexpensive and readily available
    Galvanized steel for strength and durability
    C- channel in cross section for added rigidity
    Predrilled holes create multiple points of attachment
    Flat sided for easy connections
    Easily drilled with power drill
    Easily cut with power tools - I haven't tried a hacksaw on it yet
    Matched perfectly with special connecting hardware
    Did I mention inexpensive?

Remove these adsRemove these ads by Signing Up

Step 1: Gather your materials and tools

Picture of Gather your materials and tools
You will need
    Strut channel (comes in 10 foot lengths)
    U-bolts (two per cross bar)
    Metal cutter of choice - reciprocating saw, hack saw, cutting disc for drill, etc.
    Metal file for smoothing cut ends
    Something to pad the contact points on the car's existing rails - I used heat shrink tube and inner tube rubber.
    Something to cap the bar ends (so no one gets hurt).
    Non-permanent Loctite or double up on nuts in key locations.
    Any custom attachments you need to fit your toys.
jgerew made it!7 months ago

Thanks for posting! I used this design in a pinch for carrying a car top carrier and it worked perfectly! I added some rubber pads to protect the roof rails and increase grip. I'd like to add some caps to bolts and nuts but that can wait.

I used a hacksaw to cut the bars and was finished with the whole project in about 30 minutes.

alhazen (author)  jgerew6 months ago

Sweet! Glad you got some mileage out of this. I really like your rubber grips - the fit and finish of mine left something to be desired.

JWEngland2 years ago
Good idea. Some acorn bolt caps or nuts could solve the exposed thread issue. Rubber caps for a spring-tension curtain rod would also work to cover the bolt threads, give it a more finished look.
alhazen (author)  JWEngland2 years ago
Thanks JW. I bet I have one or maybe both somewhere in the garage. (Finding them may be a bit of a problem though. Somehow I missed Spring cleaning this year.)
I know exactly what you mean about Spring cleaning! I've had to set that as a workshop priority this year. I found myself spenidng time looking for things I thought I had, or buying something and then finding the same item in the workshop later!
rimar20002 years ago
Good work, those bolt ends sticking up help to tie a rope. Maybe you like to read my roof rack. Specially STEP 6 !
alhazen (author)  rimar20002 years ago
I like that. Thanks for the idea.

Looks like you've been keeping busy - that's a lot of instructables. Keep it up.
ventifact2 years ago
There are a lot of bolt ends sticking up to grab clothing and flesh.
alhazen (author)  ventifact2 years ago
You are right. Even though these are fairly blunt, Murphy's Law dictates I cover these. I'm leaning towards plastic cups (like miniature crutch tips).

The bar ends could use a little work too. There is the old "cut tennis ball over the bar end" trick but that is just one layer too ghetto even for me. Liquid rubber for coating tool handles is probably what I'll do there since I already have a can.

Once the galvanized coating gets a bit etched from the weather I'll hit it all with a coat of paint, too.
LesB2 years ago
Great. I have been putting off getting racks because they are so pricey. In what section of Home Depot do you find the strut channel?
alhazen (author)  LesB2 years ago
It's back in electrical next to the metal conduit. The accompanying hardware is usually right next to it. Cost about $12 for a 10' length.