With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share what you made with text, photos, video, and files
gather your favorite instructables together
This is a remote controlled Halloween project. It can squirt water at you, then dry you off with a cordless blower, swing arms out to "grab" the kids ...
This has always been the most difficult part but I have done enough to know now that a linear actuator is by far the best thing to use for steering. A...
Wire the sabertooth ground terminal (GND) to the battery ground, and take the positive lead of your battery and wire it into a 50 amp switch. (cheap f...
You should now have a driving and turning RC powerwheels car. If you have a 6 channel remote control, you still have 4 channels left to do anything yo...
Next I added a water pump from a 12volt sprayer. This is wired directly to the ground of the battery and through the switch, just like the other two s...
Now on to the arms. I used two right angle gear motors that were surplus from car seat adjustments. They are approximately 100 RPM so i knew that was ...
I put a cordless blower into the powerwheels to blow air into the kids faces. I used the existing battery that comes with them. Connect the ground ter...
The chomping teeth on hood were really easy to make. I put a small hinge on the hood and put a slow turning (30 RPM) motor inside the hood with a shor...
I added LEDs into the clowns eyes to make him seem more creepy. I used some LEDs bought from hobby partz that will take 5volt input to make them glow....
I had a set of walky-talkys and kept one with me inside the house and put the other one in the powerwheels. I used a PA horn bought from ebay several ...
I hope this gives someone ideas for next year... Send me some better ideas
We have a be nice comment policy. Please be positive and constructive.
Giant Web Controlled Rover - Submitted by BayLab for the Instructables Sponsorship Programby aloishis89
Switch Adapted Remote Control Dirigible Shark by TCFDATDept
6ft Tall, Remote Control, Tilt-Rotor, Flying Ghost Scars Children for Lifeby UtahAerials
Halloween How-To- Psycho Clownby amandaggogo
"Class Clown Delivery" Halloween Illusion Costumeby Sonata85
Sad Clownby shawnakstudio
How to draw a Creepy Clownby thetoadmaster
Record Infrared Codes of Any Remote Control Unit for Usage with Linux Infrared Remote C…by mirza irwan osman
Killer Clownby ZombieAlice
Download our new apps for iOS, Android and Windows 8!
© 2015 Autodesk, Inc.
By clicking "Create Account" you are indicating that you have read and agree to the Terms of service.
Already a member? Login »
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »