Print PDF
Favorite
Email
Step 3Making the Talking Pumpkin Character
The talking pumpkin started off with a styrofoam pumpkin from a craft store.
Cut the pumpkin in half, with a zigzag in the front for the teeth.
Use a straight cut in the back so that there's no interference when the top moves.
Hollow out space for the servo & bracket.
The top is fastened to the servo horn with a piece of aluminum bent into an L shape.
Paint any visible cut surfaces of the styrofoam with a water-based paint (that won't eat away the foam)
Cut the pumpkin in half, with a zigzag in the front for the teeth.
Use a straight cut in the back so that there's no interference when the top moves.
Hollow out space for the servo & bracket.
The top is fastened to the servo horn with a piece of aluminum bent into an L shape.
Paint any visible cut surfaces of the styrofoam with a water-based paint (that won't eat away the foam)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
