Print PDF
Favorite
Email
Step 2Make your backing
First we have to make a backing for our fountain. Lay your cardboard on the floor and draw out the shape that you want. I used a tombstone shape, but you can do anything you want.
Using an exacto knife or scissors for thing cardboard cut out your shape, and tape it to the back of your basin. Make sure it's on there good - The tape won't really matter later. You'll just cover it up anyway!
Packaging tape is what I used for this step, but masking tape could work too. Just put the backing up against the back of your basin, and wrap it with tape. Make sure it's tight so it doesn't fall over later.
Using an exacto knife or scissors for thing cardboard cut out your shape, and tape it to the back of your basin. Make sure it's on there good - The tape won't really matter later. You'll just cover it up anyway!
Packaging tape is what I used for this step, but masking tape could work too. Just put the backing up against the back of your basin, and wrap it with tape. Make sure it's tight so it doesn't fall over later.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
