Introduction: Halloween LED Witch Hat
This is a quick and simple project involving the great SuperFlex LED Strings, in color purple to match the hat. Spooky witchy purple lights glow from the inside of the fabric; no soldering involved, battery pack already attached.
Witch hat or any other object you want to bling out
SuperFlex LED strand with battery pack
Step 1: Attach the Battery Pack
Our SuperFlex LEDs already come with a battery pack with a switch, it just needs to be attached in an inconspicuous location where it can be reached easily. In this case it is the underside of the brim at the back of the wearer's neck.
Place a battery pack where you want it. Cut out a piece of fabric roughly the size of battery pack, and sew it down. In this case the fabric is slightly stretchy which helps to hold the heavy battery pack in place.
Step 2: String the LEDs
Thread the LED string inside the hat brim using a bobby pin.
Step 3: Attach the Rest of LEDs
Turn the hat inside out and glue the rest of the string loosely spiraling towards the top of the hat.
Step 4: All Finished
About 20 minutes - and the hat is wear-ready.
We have a be nice policy.
Please be positive and constructive.