With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
before you start your helmet you must go downlaod a program called pepakura .. this program is completely free to download so you don't have to worry...
You will need: pepakura viewer Bondo fiberglass resin facemask cardstock paper x-acto knife craft glue latex gloves brush spray paint(colors of you...
First download the file containing the model for the helmet at.... http://www.4shared.com/file/55971021/23801b1f/Agbates_-_Hayabusa_Helmet.html Once...
once printed out you must begin to cut out all the pieces. *be warned there is a lot of cutting to be done* use an old magazine or cutting board while...
to figure out where the pieces go you must match the numbers on a piece to another piece with the same number. you can also use pepakura viewer and mo...
for this step you'll need to mix the fiber-glass resin with the small container of hardener, that comes along with the resin, as it says on the back o...
Like the resin, mix the Bondo with the hardener that comes with it as it says on the back of the container. For this step, apply the bondo to the helm...
this step is pretty simple all you have to do is sand down the bondo until it is smooth... i used a sanding block for the larger parts as it made it ...
ok your almost done :)... now you must apply an even coat of primer to your entire helmet once that dries spray the majority of the area(s) the color ...
once all the paint has dried you are free to remove the masking tape and you halo hayabusa helmet will be done
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »