Hammer Holder

https://www.youtube.com/watch?v=0NX8pNKt3Gw ID:0NX8pNKt3Gw

Last week i restored my 1st ever claw hammer , it seemed only right i make a tool holder for it.

Nice and easy couple of bit of scrap wood and your done.

I hope you enjoy!

Please leave a like, share & comment. And subscribe for more like this!

Watch the build - https://www.youtube.com/channel/UCRMjvilGRdZxHqr34QKzB_Q

Follow my work on instagram - https://www.instagram.com/ggwoodproje...

Help me make more projects- https://www.patreon.com/GGWoodwork

One time tip - https://www.paypal.me/GGwoodwork

Thanks

STEP 1: Layout & Cut

First i found some scrap wood that was long enough to make all the pieces, next i cut it down to size and cut a top and bottom piece that would hold the hammer in place.

STEP 2: Plane & Shape

I planed it all square and flat and but an angle on the corner just to make it look a bit nicer.

STEP 3: Glue

Now onto the glue up, pretty simple just glued the top and bottom pieces into place making sure i had a really tight bond.

STEP 4: Finish & Job Done

Spray lacquer and a couple of screws - job done.

I told you it was simple.

But it also works a treat and doesn't take up to much space which for me is crucial !