Print PDF
Favorite
Email
Step 5Hooking up the switch
You might have noticed I put spade connectors onto the switches, you can do this too, but you don't really need to.
Wiring is simple enough, loop the wire around the screws and then tighten them.
If you have one wire from the negative battery terminal like me, put a switch on it, I would but I didn't have any switches handy.
Wiring is simple enough, loop the wire around the screws and then tighten them.
If you have one wire from the negative battery terminal like me, put a switch on it, I would but I didn't have any switches handy.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
