Introduction: Handcraft 925 Sterling Silver Tube Bending Unisex Braided Bracelets

Picture of Handcraft 925 Sterling Silver Tube Bending Unisex Braided Bracelets

Step 1: Prepare Two Cords, If Circumference of Your Wrist Is Approx 16cm, the Cords Should Be 2 Meters.

Picture of Prepare Two Cords, If Circumference of Your Wrist Is Approx 16cm, the Cords Should Be 2 Meters.

Step 2: Step 2: Bring the Two Cords Together and Fold Them in Half. Then Start Braiding Snake Knots From the Center-left. 2.2mm Snake Knots Is Enough

Picture of Step 2: Bring the Two Cords Together and Fold Them in Half. Then Start Braiding Snake Knots From the Center-left. 2.2mm Snake Knots Is Enough

Step 3: Tie the Four Cords Together With a Secure Knot.

Picture of Tie the Four Cords Together With a Secure Knot.

Step 4: Thread One More 1m Cord to the Middle of Four Cords and Start to Braiding Corn Knots.

Picture of Thread One More 1m Cord to the Middle of Four Cords and Start to Braiding Corn Knots.

Step 5: Stop Braiding When It Reach Your Desired Length. Thread the Hollow Out Sterling Silver Bend On.

Picture of Stop Braiding When It Reach Your Desired Length. Thread the Hollow Out Sterling Silver Bend On.

Step 6: Tie an Overhand Knot at the End. Trim the 4 of Cords and Burn Threads. Threading Sterling Silver Beads to the Rest of Cords, and Then Tie an Over Hand Knot.

Picture of Tie an Overhand Knot at the End. Trim the 4 of Cords and Burn Threads. Threading Sterling Silver Beads to the Rest of Cords, and Then Tie an Over Hand Knot.

Step 7: Trim the Needless Cords, Burn the Excess Threads.Done It!

Picture of Trim the Needless Cords, Burn the Excess Threads.Done It!

Step 8:

Picture of

Comments

About This Instructable

1,593views

32favorites

License:

More by Renee2014:Friendship bracelet patterns - friendship last foreverHandmade Red Agate and Jadeite jade "flower fairy" beaded bracelet DIY03Handcraft 925 Sterling Silver Tube Bending Unisex Braided Bracelets
Add instructable to: