Instructables

Handlebar hand warmers

FeaturedContest Winner

Step 4: Assembling

Picture of Assembling
073.JPG
081.JPG
082.JPG
Now that your velco is on, you are ready to sew the handwarmer together, hooray!

9. Place the dome-shaped pattern on top of the rectangle. The folded edge should align with the top of the velcro strip. Pin

10. Sew around the raw edges, close to the edge.

11. Trim the edges by cutting close to your stich around the curve. Turn the glove part right side out.

Repeat these steps for your second handwarmer.
Now you have 2 funny looking gloves...


 
Remove these adsRemove these ads by Signing Up