Instructables

Kitchenaid and Power Drill Christmas Ornaments

FeaturedContest WinnerContest Winner

Step 4: Mixer stand

Picture of Mixer stand
ornaments 038.JPG
ornaments 055.JPG
ornaments 061.JPG
A jigsaw was used to cut out the pieces for the stand. These were all glued and clamped together.

I used my rotary tool to carve down the shape and sand it smooth. Wood filler was used to fill in any gaps and cracks, and the piece was finish sanded with 220 by hand.
 
Remove these adsRemove these ads by Signing Up