Introduction: Handpowered Soda Can Torch

torch that don't need batteries!

Step 1: Materials Required

Picture of Materials Required

soda can

2 leds

geared dc motor

aluminium wire to use as a shaft

plastic bottle top

Step 2: Make a Hole on Bottom Side of Soda Can

Picture of Make a Hole on Bottom Side of Soda Can

Step 3: Cut the Top Surface

Picture of Cut the Top Surface

Step 4: Using Hot Glue Stick Dc Motor to Bottom Side

Picture of Using Hot Glue Stick Dc Motor to Bottom Side

Step 5: Connect Two Terminals of Dc Motor to Led

Picture of Connect Two Terminals of Dc Motor to Led

Step 6: The Led Is Held in Place by Using Olastic Bottle Top

Picture of The Led Is Held in Place by Using Olastic Bottle Top

Step 7: Hot Glue Everything and the Torch Is Ready for Action!

Picture of Hot Glue Everything and the Torch Is Ready for Action!

Comments

About This Instructable

515views

7favorites

License:

Bio: Sciency Guy who is always trying to make some innovative projects,check out what i made in my instructable,Follow me if you think i ... More »
More by ROBO HUB:DIY External Bass Speakers for Mobile Phones and Laptops | Recycle IdeasHow to Make Custom Paper Fidget Spinner Without BearingsDIY Solar Powered Phone Charger Under 5$
Add instructable to: