With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
Here's how to make a really effective cord organizer. I wanted to buy something like this but could not find it... From the picture, you can probably...
Material List: Foam Rubber Velcro or Double Sided Tape Tool List: Craft Drillpress 1/4" Drillbit Couple Pieces of Scr...
The First Step is to cut a piece of the Foam. I suggest using a utility knife with a fresh (sharp) blade. For best results, make your cuts clean and...
First Mark the spots for the holes. My foam pieces are 6 inches long. I marked 5 spots each 1 inch apart. (and left 1/2 inch space at both ends) ...
Next step is to cut slits in the foam. Take care to ONLY cut through one side of the foam. You only want it open on one side. When using the utilit...
I used 3M double sided mounting tape to install my cord holder. You could also use velcro. I have found that the mounting tape works better.
I mounted my holder on the side of a small bookshelf. Just push the cord into a given slit and the foam will "pinch" closed up again and hold the cor...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »