Introduction: Hanging Flayers

Maker : Deepak

Location : Banjaraplya E4D Makerspace

I did this hanging flayers in Banjaraplya E4D Makerspace for build night with strawbees.


  1. 44 strawbees modle
  2. 660(strawbees)
  3. 154(2-straw bees)
  4. Straws


No tool

Step 1: Put 44 Strawbees Modles

Put the 44 (5) strawbees as shown in image.

Step 2: Put the Straw

Take the another straw fix it and in up side bend the straw has shown in image.

Step 3: Doing the Samething

Do the same thing again as shown in the image.

Step 4: Fix the 44 Straw Bees

Fix the 44(2 straw bees) and fix it both straw has shown in the image.

Step 5: Putting the 660

put 660 (straw bees) has shown in image.

Step 6: Putting the Straw

Take another straw and fix the straw as shown in the image.

Step 7: You Need 2 Modal Again

You need to do a same 2 modal again

Step 8: Final Project

Finally my project is finished.


amberrayh (author)2015-06-24

It looks great. Thanks for sharing!

deepak_e4d (author)amberrayh2015-07-03

Thank you

About This Instructable




More by deepak_e4d:ATM  MachineRubberband jukeboxPhoto shooting  game
Add instructable to: