Introduction: Hard Bond Any Paperback Book

Picture of Hard Bond Any Paperback Book

Hello everyone, In this instructable we will be using cardboard to hard bond any paperback book.

Hard bonding paperback books is a easy task that should not take more than 30 minutes.

But, adds more life to thin paper back books.

I used scrap cardboard, cutting tools and glue only to hard bond the books. But the results were awesome.

Step 1: Supplies

Picture of Supplies

In order to hard bond any paperback book we will need :

  • Cardboard
  • Glue
  • Cutting tools
  • Pen and ruler for marking

Step 2: Cut the Cardboard

Picture of Cut the Cardboard

Cut the cardboard according to the size of the book.

  • Place the book on the cardboard and mark according to the size of the book.
  • Leave about 0.8 cm of space all around the book and cut the cardboard.
  • Cut two similar pieces for front and back and one for the spine of the book.

Step 3: Glue the Cardboard

Picture of Glue the Cardboard

Add good amount of glue and paste the cardboard to the book.

Step 4: Done

Picture of Done

Finally cover up the book using any coloured or white paper and you are done.

Thanks for viewing.

Comments

rajmchavda (author)2016-08-19

any special type of glue you used or just normal school type of white glue? thanks.

About This Instructable

589views

10favorites

License:

More by kitty 1234:Control Your Home Appliances Using IR RemoteControl Your Home Appliances Using Arduino And RelayHard Bond Any Paperback Book
Add instructable to: