Print PDF
Favorite
Email
Step 5Attaching the Magnet
In this step you'll be attaching the magnet to the back of the drive motor.
You'll need your tube of strong glue for this.
Take your reassembled platter/motor piece and take the motor sticker of the bottom of the motor. The underside should have a few holes they use to solder on the power wires. Take your Goop or Super Glue and fill these holes. Then take the magnet(s) you've harvested and place them over the holes. The magnets conveniently keep themselves firmly pressed against the glue.
You'll need your tube of strong glue for this.
Take your reassembled platter/motor piece and take the motor sticker of the bottom of the motor. The underside should have a few holes they use to solder on the power wires. Take your Goop or Super Glue and fill these holes. Then take the magnet(s) you've harvested and place them over the holes. The magnets conveniently keep themselves firmly pressed against the glue.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
