Instructables

In this instructable we turn a hard drive into a speaker. 
 
Remove these adsRemove these ads by Signing Up

Step 2: Disassemble the hard disc drive.

Picture of Disassemble the hard disc drive.
dsc00316.jpg
Disassemble the HDD.Use the T9 torx screw driver to remove the screws.Some of the screws are hidden under the label on top of the cover.

Step 3: Remove the magnet on the top.

Remove the magnet on the top. First remove the screw that holds it in place and lift the magnet out slowly.

Step 9: Completed.

The mod is complete. Connect the wires to your amp. Mine is 30w x 2 so that i can connect the spindle motor and the read/write head seperate and each of them gets 30w = 60w total.

Step 10: Play some music!


1-40 of 144Next »
Lunsel2 years ago
Really it works. Now i have done it with an old hard drive. Really cool!
if you could find something to do with the disks other than a turbine i'd be impressed because i have about three inches of the disks and i'm not exagarating
GASSYPOOTS2 years ago
thats annoying X_X
frostybob2 years ago
Hey guys did as per instructable and nothing happens. Tried it on two HDD and still nothing on either. HELP???? and sorry.... It is possible I broke something because the reading things on the end looked pretty munted
Ace Winget3 years ago
I just use a small flat head and you can get those torx screws to loosen. If you have a drill the you could always just drill those out. I found an image of a hard drive dis-assembly here that I found really cool and helpful. Thanks sybyabraham great info!
_Scratch_3 years ago
Korn in the vid! lol
Also, can anyone give me an explanation on how this works?
Jords0014 years ago
Very cool. Has anybody tried this as a microphone? Just curious what the quality would be like.
doesnt work well
ametz4 years ago
I do not have a torx screwdriver or a drill press. I have all of the outside screws off by using a wrench, but the hidden screws are impossible to get to without the screwdriver. what can I do?
cody777 ametz3 years ago
if you have a dremel you can cut a slit into the screw and use a flat-head, i do it a lot
apb2390 ametz4 years ago
I'd say it's very hard to do that, but you can get a T9 Torx screwdriver set for 8.95 USD at a large hardware store.
Pyrice43 years ago
You can follow these two all the way through the ribbon wire into the back of the main PCB so you dont have to take the arm off.
Yea, that's what I'm doing now. Seems alot easier soldering to the existing PCB (especially on this old 90's hard drive I'm using where the components are massive) than doing this delicate stuff.
sweet aw gee i wish i had a busted hard drive lying around now oh well ill find one soon nice job anyways cool setup LINKIN PARK ROCKS
its Korn. how does that sound anything like linkin park?
The cd in the second last step is linkin park...
but your comment is on the front page with korn.
wupme XZ3R03 years ago
Because all comments from all pages show up on the front page
madd0g XZ3R05 years ago
lol..
that's not my comment... maybe they posted the comment on the all steps page...
i think u can get one at a local computer repair shop cant you?
Joxson5 years ago
It´s not a speaker in there. I made one for myself today. It works great!!!! Can I make so the volume is higher? Sorry for my English!
my suggestion: make multiples, and then solder the like ends to make the proper amount, solder wires onto those ends, and plug it in. more speakers=more sound.
Sorry for so late but a fun thing.

I wanted volume so I pushed in 130 Watt in it! HAHAHA, it starded to smoke^^
But the volume was high.

The harddrive speakers can stand aboud 110 Watt:D
...
bioerror4 years ago
what u do is get 2 ppl, 1 person holds the HDD down and the other uses 2 pliers and grabs the metal on either side of the magnet and pulls up with all their might!
Korn (Y)
dakiller5465 years ago
mine only has three terminals :( witch do i use
 yes it will work
one is a ground and danymw just has a different hard drive
test out each terminal with test leads
youll find the two that work
 it won't work
danymw7 years ago
are you sure? i allmost smashed my fingers with it,and broked the hdd...when connecting the wires.i'll get another one
I had issues with mine also, did yours twist off, or slide off? it took me five minutes to realize that my WD drive magnet twists off, and my Seagate... doesn't
 i opened up about 10 hdd,all damaged or low memory space, but they were all different. rarely,the magnet just comes out,but usually you have to use a screw driver to remove the top magnet (after removing the screws). if you twist it, you'll hit the head or even the plates and damage the hdd,which i did once, and it's not good. 
good luck
ametz4 years ago
It wont come up... help??
Mr.Grinch ametz4 years ago
I had the same issue with the arm, I think he forgot to mention that there is another screw on top, where you removed the screw to get the cover off. Mine happened to be an hexagonal screw that had another screw in it
zack247 ametz4 years ago
you may need a flat screwdriver to unscrew it
ShotPain4 years ago
 i was hoping you could make a turntable out of a HDD :D
Helder4u4 years ago
I would not try to connect to the motor drive.. but only to the arm assembly.
That should take care of burning amplifiers and sound inconsistencies.
congratulations on making it on N4G.com!

http://www.n4g.com/industrynews/News-318009.aspx
1-40 of 144Next »