Hard Drive Speaker

Step 2 Disassemble the hard disc drive.

Now let's disassemble the HDD.Use the T9 torx screw driver to remove the screws.Some of the screws are hidden behind the label on top cover of the drive.

Comments

[Ace Winget]

I just use a small flat head and you can get those torx screws to loosen. If you have a drill the you could always just drill those out. I found an image of a hard drive dis-assembly here that I found really cool and helpful. Thanks sybyabraham great info!

[ametz]

I do not have a torx screwdriver or a drill press. I have all of the outside screws off by using a wrench, but the hidden screws are impossible to get to without the screwdriver. what can I do?

[cody777]

if you have a dremel you can cut a slit into the screw and use a flat-head, i do it a lot

[apb2390]

I'd say it's very hard to do that, but you can get a T9 Torx screwdriver set for 8.95 USD at a large hardware store.