Step 1: Gather Supplies
Some polymer clay - I've used Sculpey for this project.
You'll need three colours - green, purplish-red, and white.
A pair of earrings - you can probably get these from any craft store.
small amount of bendable wire (to attach radish to earrings)
Step 2: Prepare Clay
You will need more or less depending on how large you want your earrings to be. Proportionately, you should have more red clay than white, and more white than green.
Step 3: Putting the radish together
Roll both pieces in your palm until you have one unified sphere.
Step 4: Adding roots
Roll the tip of the cone to create a short root.
Step 5: Leaves
You will want the middle leaf to be large and thicker, as this is where your wire will be inserted.
Attach all leaves together at the stem and pinch/roll them together.
Using a pen, make a hole in the top red part of your radish. Insert the leaves into this hole stem-first.
Step 6: Wire
Insert the other end of the wire into the middle large leaf of the radish, pushing down so it enters the red part as well. This will help to hold the pieces together once baked.