Print PDF
Favorite
Email
Step 2Witch Hat Pattern & Cutting
Cut your foamboard, or cardboard in an 18 inch diameter circle. Use this to trace around on two of the pand legs. Take one circle, and cut a 8 - 9 inch diameter hole inside it. This piece will be used for your brim.
Using a third pant leg, for the top portion of the hat, fold the pantleg in half, then cut a diagnal from the bottom of the leg , coming to a point at the top.
Around the bottom circumference, of the top portion, you will make 8 to 10 notched sections going all the way around the bottom. The tops of each notch should be even, and going up 1 inch from the bottom.
Using a third pant leg, for the top portion of the hat, fold the pantleg in half, then cut a diagnal from the bottom of the leg , coming to a point at the top.
Around the bottom circumference, of the top portion, you will make 8 to 10 notched sections going all the way around the bottom. The tops of each notch should be even, and going up 1 inch from the bottom.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
