Print PDF
Favorite
Email
Step 2Remove guts and dissaseble
Take the PCB(printed circuit board) and the wires out of the shell. The green PCB is the flaw! We must remove it. The wires are designed to be used for 802.llg/b signal of 2.4Ghz. The PCB may or may not be. More importantly every time a splice is made in a signal wire, signal gain is LOST.
The "Engineering" behind the green PCB is to make the mast of the antenna fit together with the thinner grey wire in it. It simply does not assemble with the thick white wire.
The "Engineering" behind the green PCB is to make the mast of the antenna fit together with the thinner grey wire in it. It simply does not assemble with the thick white wire.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
