Introduction: Heart Button

Picture of Heart Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

In this lesson you will learn to make a heart shaped button. Let's get started!

  1. Drag a Box shape to the workplane.

Step 1: Heart Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Scale it down to a height of 2mm and a size of 12mm x 12mm.

Step 2: Heart Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Drag a Cylinder shape to the workplane.

Step 3: Heart Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Scale it down to a height of 2mm and a diameter of 12mm.
  2. Move it to the area marked in orange.

Step 4: Heart Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Copy and paste the Cylinder.
  2. Move the new cylinder to the area marked in orange.

Step 5: Heart Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Select all the shapes and rotate the heart 45 degrees.

Step 6: Heart Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Drag a Round Roof shape to the workplane.
  2. This will be the button stem.

Step 7: Heart Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Scale it smaller to a height of 5mm and size it to 8mm x 2mm.

Step 8: Heart Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Move the stem to the top of the heart.

Step 9: Heart Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Copy and paste the stem and make the new copy a hole.

Step 10: Heart Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Scale the hole smaller to a size of 4mm x 7mm and a height of 3mm. Move the hole so it fits in the stem. You can see the location marked in orange.

Step 11: Heart Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

  1. Select all the shapes.
  2. Group them by pressing the Group button in the menu bar.

Step 12: Heart Button

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

Congratulations! You made it!

Comments

About This Instructable

35views

0favorites

License:

More by tinkercad-support:Balloon Powered CarCreate a Path for the AirCreate a Penny Whistle With Fusion Web
Add instructable to: