Step 2: Free form

The heart is free form and cut from a piece of an old food box that was destined for the bin!

You will need 2 heart shapes, one slightly larger than the other.

Since these will have to nest together make sure that the larger one is big enough to make room for the cardboard core and tape layers.

Cut the original heart from cardboard then flip it over and trace the edge on another piece.

Cut the larger one about 2mm outside of the edge of the smaller one.

Nice work!
Very cool. Nice job. Thanks for the cool 'able!
Thanks. this was a great hit on the big day

About This Instructable




Bio: Sometimes I have time to make things.
More by Random_Canadian:Propane Foundry Forge Burner Fifth Element Stones Warm winter hat with no fog facecover 
Add instructable to: