Print PDF
Favorite
Email
Step 3Parts are removed.
Now that you have removed the parts you are interested in. Let the board cool and do with as you please.
This picture shows the parts removed.
I have removed through-hole, BGA, SMT parts using this method. For some parts heating the backside of the PCB and letting the parts fall off can be faster. This only works with parts big enough to fall off.
Also I have seen some parts seem to be glued to the board and are more difficult to remove. So be warned.
This picture shows the parts removed.
I have removed through-hole, BGA, SMT parts using this method. For some parts heating the backside of the PCB and letting the parts fall off can be faster. This only works with parts big enough to fall off.
Also I have seen some parts seem to be glued to the board and are more difficult to remove. So be warned.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
May 17, 2008. 10:20 AMBFeely
says:
Parts are often glued to board if they are on the underside.
Reply
 |
Add Comment
|
