With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
This is my first Instructable, so forgive if this is alittle ruff. As I alway do, get back up and move on and try again. So let get ...
This is some of tools used and plus more.
This is the template I used
Setting up the saw, yes I don't have a blade guard on. I do unplug the saw when making any changes. And always check blade ailgn with fence. ...
Here are all parts. I used 3/4" birch plywood the pieces cut are: 1) 11" x 71/2" 4ea. 2) 11/4" x 11" 4ea. 3) 3" x 9" 2ea. 4) 3" ...
Clean, and sand all the pieces. Now start building it and make sure every piece line up, glue and tack nail.
The one piece that 1 1/4" x 11" is glued to 1" x 3" and clamp to main piece. Hole are drilled for 1/4"-20 bolts thread insert. This ...
Now needle Im used was 1/16" some drilled is out to 9/64". I space the the tread hole at 3/16" apart. And other three hole for 1/4"-20 but only need ...
I drilled the big holes and then clamp down with screw so the it easier drill all little holes.
The paper will get hot, and smell like burning. But fun part next.
This loop type sewing, next time just use two small needles. I can knit, but this is for the birds. Aww I broke my little needle I did ...
Put making tape on edge so the glue don't down the side, and also need put waxpaper on the front and back it will stick to the wood. ...
Cheap Book Bindingby nunopcardoso
Super Simple Book Bindingby diomedesofcrete
Scrabble Board Wedding Guest Bookby KerryW
Handbound Sketchbookby ursaminor
How to recycle office paper into blank booksby bekathwia
Join 2 million + to receive instant inspiration in your inbox.
Download our apps!
© 2015 Autodesk, Inc.