Print PDF
Favorite
Email
Step 2Prep fixture covers
Step 3: Drill hole on top of Air Gap Cap to thread wire from Hemma fixture through (repeat for all fixtures)
Step 4: Using wire cutters and sanders, grid down threading on Hemma fixture so that Air Gap Cap can slide over and cover the threading of the fixture (repeat for all fixtures)
Step 5: Remove Air Gap Caps from all fixtures
Step 4: Using wire cutters and sanders, grid down threading on Hemma fixture so that Air Gap Cap can slide over and cover the threading of the fixture (repeat for all fixtures)
Step 5: Remove Air Gap Caps from all fixtures
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
