Instructables

Step 5: Install hooks and thread fixtures

Picture of Install hooks and thread fixtures
 Step 8:  Insert Eye Hook through Washer.  Apply glue to washer so that it is glued flush to the ceiling when Eye Hook is screwed in.  Screw in Eye Hooks to marked points.  (repeat for all washers and hooks)

Step 9:  Install all painted Air Gap Covers over the Hemma Fixtures

Step 10:  Thread wire through Eye Hook so fixtures hang at desired height.  Remember to account for additional length of light bulb when setting length.  (repeat for all fixtures
 
Remove these adsRemove these ads by Signing Up