Print PDF
Favorite
Email
Step 6Connect wiring
Step 11: Determine desired amount of wire slack from the Eye Hook to the electrical box and cut off excess - leave an extra 3-4 inches to play with (repeat for all fixtures)
Step 12: Strip wire cover at the end of the Hemma Fixture to expose Black & White wires. Strip black and white wires (repeat for all fixtures)
Step 13: Group all wires ends together and thread through cover. Use cable tie to secure all wires together.
Step 14: (Hopefully you've had the power turned off from the main panel this whole time) Using Wire Nuts, connect all black to black and white to white.
Step 12: Strip wire cover at the end of the Hemma Fixture to expose Black & White wires. Strip black and white wires (repeat for all fixtures)
Step 13: Group all wires ends together and thread through cover. Use cable tie to secure all wires together.
Step 14: (Hopefully you've had the power turned off from the main panel this whole time) Using Wire Nuts, connect all black to black and white to white.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
