Introduction: Hexapod Shoe With Hot Glue Stick

Picture of Hexapod Shoe With Hot Glue Stick

Currently I am working on hexapod. I have to use shoes for the hexapod legs. I tried with some other material but it was skiddy. Now I made shoes with hot glue stick and are working well without skidding.

Step 1: Parts and Tools Needed

Picture of Parts and Tools Needed
  • Hot glue stick.
  • Ruler.
  • Knife.
  • Hand drill.

Step 2: Cutting the Glue Stick

Picture of Cutting the Glue Stick

Cut the glue stick into the size of 3/4 inch. Drill a hole at the center of the glue stick. Attach it to the leg. Similarly do it to all the legs.


About This Instructable




More by sandilya.anisetty:PVC USB/FM/Bluetooth PlayerRestoring / Reusing Sand PaperDIY PCB Cutter AKA Mini Table Saw
Add instructable to: