Materials, for each hanger you'll need:
One cleaned or refinished paint can.
2 screws long enough to reach into wall studs.
Long handled screwdriver or screw gun with sufficient extensions to reach bottom of can.
Punch or small drill
Stud finder (optional)
Step one: With the handle in a horizontal position, layout and make 2 small mounting holes at the top and bottom of the can within an inch or less of the edge.
Step two: locate and mark stud position on wall for upper screw position.
Step three: Screw through the upper hole of the can into the wall stud but not quite snug to the wall.
Step four: Straighten the can and screw through the lower hole of the can into the wall stud snug to the wall.
Step five: Snug up first screw.
Step six: Hang, stuff, drape and regain control of your entry space!